FUTABA GYRO GY520 WITH BLS254 SERVO

FUTABA GY520 Gyro

Ultra small and light weight gyro, one piece sensor and control unit

Utilizes a high speed advanced PID (Proportional-Integral-

Derivative) control algorithm

Latest MEMS (Micro-Electro-Mechanical Systems) allows complete control system on one chip

Superior performance with analog servos, excellent with digital servos

F3C and 3D mode selectable, six programmable parameters

Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in the 760uS mode

Programmable through single button and multi-color LED or through a PC using Futaba CIU-2 USB adapter

Registered AVCS (Angular Velocity Control System) architecture achieves unmatched tail holding ability

BLS254 Servo

Designed for 3D helis

Standard size

Equipped with two ball bearings

30% faster response than standard digital servos

INCLUDES:

Futaba GY520 Heading Hold Gyro, instruction manual,  two sections of sensor tape, mini screwdriver.

Futaba BLS254 Brushless tail Servo, horns, eyelets and grommets.

SPECS:

GY520 Gyro

Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)

Weight: 0.243 oz (6.9g)

Voltage Range: 3.8 - 6.0V DC

Current Draw: 40mA (without servo)

Operating Temperature: 14°F - 113°F (-10°C - +45°C)

Sensor Rate Range: +/- 800° sec

Angular Velocity Range: +- 800 deg/sec

BLS254 Servo

Torque: 53 oz-in (3.8kg/cm) @ 4.8V

Speed: 0.06 sec/60° @ 4.8V

Size: 1.60 x 0.80 x 1.50" (40 x 20 x 36.8mm)

Weight: 1.80 oz (51g)